The foam and felt pre-motor filters can be removed after taking out the dust canister..
Stick to warm water or mild cleaners, and make sure you use a suitable vacuum cleaner for regular dust-busting.Ideally, you want one without a rotating brush bar or the option to switch it off when cleaning vinyl floors.. Do you have any questions about cleaning vinyl floors?
Please let us know in the comments section below.And if you’re looking for a vacuum for vinyl, check out.our top cordless models for hard floorsBroken glass can be a nightmare to clean up – but is it safe to use your vacuum cleaner?
Keep reading to find out..The sound of glass smashing on the floor is one of the worst to hear – at least from a housekeeping viewpoint!
While it’s tempting to grab your vacuum and suck all the shards up, this may not be the safest (or best) option..
In this article, we’ll discuss whether to use a vacuum on broken glass, and some alternative tips for cleaning it up.. Disclaimer:.As we mentioned in our review, it’s not as versatile as other options due to the lack of a handheld mode or hose.
Even so, it’s a useful addition to your cleaning toolset and is convenient to use.. We like how easy the Gtech AirRam Mk2 is to empty.The small bin capacity compared with cylinder vacuums means you’ll be emptying it frequently, so it’s important that Gtech have made the process as simple as possible.. Here’s a quick recap of how to empty the Gtech AirRam Mk2:.
Switch off the vacuum and make sure it isn’t plugged into the charger..Lift out the dust bin from the top of the floorhead.. Take the dust bin to an outdoor bin.. Holding the Gtech’s bin over the outdoor bin, unclip the end cap.. Use the slider to push out dust and debris into the bin.. Close the end cap.. Re-insert the dust bin back into the AirRam’s floorhead.. We hope this article has helped clarify how to empty the Gtech AirRam Mk2.